ER-WD223/D

ER-WD223/D™
Automated system designed to support the manual washing and disinfection of flexible endoscopes

The ER-WD223/D™ endoscope sink is a Class I medical device designed to support healthcare personnel in the process of manual washing and disinfection of flexible endoscopes. Thanks to its advanced technology, the device ensures complete traceability and automation of washing and disinfection steps, allowing the operator to perform other tasks while the machine autonomously carries out the assigned cycle.
The device is validated according to EN ISO 15883 part 4 and 5 annex F for the removal of microbial biofilm.

Main features:
• Double-controlled leak test performed at start-up and throughout the washing cycle, to prevent the possibility of instrument infiltration;
• Automatic detergent dosage: thanks to its internal pump, the device is able to automatically dose the right amount of concentrated detergent to be diluted in the tank, reducing the risk of waste and overdosage which can be harmful for the instruments;
Enzymatic detergents validated for the removal of microbial biofilm according to EN ISO 15883 part.5 annex F:
• Amity Viruzyme
• MDD 3E Cleaner WM
• Disinfection and detersion with forced recirculation and vortex insertion into the basin, to ensure complete cleanliness of the instrumentation;
• Automatic water dosage: this device is able to automatically load the right amount of water needed for every step of the cycle and drain it once the step has been completed;
• Automatic disinfection: as an alternative to manual in-tray disinfection, the device is able to perform the disinfection cycle autonomously using the correct amount of peracetic acid-based disinfectant and drain it once the cycle is complete;
Disinfectant powder validated for the removal of microbial biofilm according to EN ISO 15883 part. 4 annex F:
• MDD HMC 9
• Flushing of the mixed detergent/decontaminant inside all endoscope channels through a special connection kit. The automatic rinsing and purging of endoscope channels will also be performed;
• Complete traceability of cycle data is ensured by paper report through the integrated printer, download of the data through USB port, Ethernet (optional) or MDG Datatrace dedicated software (optional);
• 4″ colour display that guides the operator step by step throughout all cycle phases. The monitor displays all the necessary information regarding the status of the machine: cycle phase in execution and the time remaining until the end of the cycle and the single phase;
• Standard dimensions (WxDxH) 80x75x115 cm
This system is completely customizable on specific request of the customer.


Equipment
• Activated carbon filter for disposing of chemical fumes through integrated forced aspiration (optional);
• Standard Barcode reader or Integrated barcode (optional) or RFID (optional) for reading instrument ID and operator ID;
• Convenient worktop;
• Washing basin: standard dimensions W500xD500xH200 mm;
• Transparent plexiglass lid;
• Detergent canister housing with level sensor;
• Peracetic acid tank for instrument disinfection;
• Clinical lever mixer tap with pull-out hand shower;
• Integrated thermal printer;
• Acid resistant pump and components;
• Integrated thermostatic mixer.

MORE INFORMATION